• MaxComm 4G LTEVoLTE CPE WiFi Router WR-112

MaxComm 4G LTEVoLTE CPE WiFi Router WR-112

MaxComm 4G LTEVoLTE CPE WiFi Router WR-112.
Model : WR-112


Category Feature & specification Description
Basical Information Model Name WR-112
Form Factor CPE
Dimension 170mm*155mm*25mm
Weight TBD
Color  White
Launch time(PP) Already
ID&MD Model Bitmap











Air Interface Technical Standard Compatible with   WCDMA, FDD-LTE
802.11 b/g/n
Frequency · LTE Band IV: 3GPP Rel. 8 Category 4 LTE FDD mode- whose operating frequency is 1710-1725 MHZ in the Uplink and 2110-2125 MHZ in the Downlink
· 3G Band VIII of 900 MHz whose mandatory frequency is 910-915 MHz Uplink, 955-960 MHz Downlink
· 3G: BAND II from 1900 whose mandatory frequency is 1850-1910 MHZ for the Uplink and 1930 - 1990 MHZ for the Downlink
DC-HSPA + / HSPA + / HSPA / UMTS
WLAN IEEE 802.11b / g / n 11 channels in the 2.4GHZ band
GSM Band II / V / VIII (optional)
EDGE / GPRS / GSM: 850/900 / 1900Mhz (optional)
WIFI RTL 8192 2.4GHz, WIFI 2*2 MIMO802.11 b/g/n,

• IEEE 802.11 b, g, n
• WIFI Bandwidth 300 Mbps (IEEE 802.11 n)
• WIFI Bandwidth 54 Mbps (IEEE 802.11 g)
• WIFI Bandwidth 11 Mbps (IEEE 802.11 b)
Encryption:
• AES, TKIP + AES
Security Mode:
• WPA2.0 PSK
• WPA1.0 / WPA2.0 PSK
• Open
• 2 SSID broadcast  --only one SSID for Wi-Fi 2.4G by default, can be customized
• Connectivity 16 simultaneous devices
Performance Maximum Data Throughput LTE
Download speed or Downlink: 150 Mbps
Upload Speed or Uplink: 50 Mbps
Duplexing mode: FDD (Frequency Division Multiplexing)
3G
DC-HSPA +: Downlink 42 Mbps, Uplink 5.76 Mbps
HSPA +: Downlink 21 Mbps (64QAM) / 28 Mbps (MIMO), Uplink 5.76 Mbps
HSPA: Downlink 14.4 Mbps, Uplink 5.76 Mbps
Technology: UMTS / HSPA / HSPA +
Hardware Receive Diversity Support Receive Diversity
MIMO Support DL 2x2 MIMO
BB Chipset Qualcomm MDM9207
RF Chipset Qualcomm WTR2965
WiFi Chipset RTL8192(802.11b/g/n)
Memory 4Gb+2Gb
power consumption 18W
Power Voltage • Alternate AC Type = 100 to 240 VAC sensitive. Power cord with plug that complies with the standard used in Paraguay. C (CEE 7/16), or A (NEMA 1-15 USA 2 pins without ground pin). Maximum DC voltage for adapters: 5-12V / 1-1.5A. Battery solutions are also accepted
--Adapter is 12V/1A , not support battery. 
USIM/SIM 2FF SIM card
support SIM/USIM/UIM,standard 6 PIN SIM card interface,
support 3V SIM card and 1.8V SIM card;internal 
push-push SIM slot
LED  Power Indication LEDWAN Signal Strength WiFi/WPS Indication LED WAN/LAN Status LEDInternet Status LED, 
Internal LTE antenna 3 dBi at 1700 / 2100MHz frequency (AWS)
Efficiency> 45% 
External LTE antenna • It must provide two or more external antennas with a minimum gain of 2 dBi each. In case the equipment supports more than two antennas, you must provide all antennas for each equipment.
• Efficiency> 40%
WiFi Antenna Built-in WIFI antenna
Gain 2 dBi
Efficiency> 50%
Maximum Transmission Power for WIFI •          18dBm in 11Mb/s
•          14dBm(Max) en 11g mode
•          14dBm in 72.2Mb/s
Maximum Transmission Power Cellular network LTE, 3G conforming to 3GPP Power class 3 standard
Cellular Network Sensitivity LTE, 3G compliant with 3GPP standard
Buttons POWER,Reset,WPS
Slic SI32185
Ethernet 4 WAN/LAN 10BaseT/100Base/1000Base automatic adaptive port
auto-negotiation RJ45 ports
IEEE 802.3 / 802.3u
Allow connection mode PPPoE + Dynamic IP, Dynamic IP, Static IP, WAN
RJ11 RJ11x1
Reset Pinhole
ESD ESD Protection circuitContact±8KVAir±10KV
Battery Not Support
Software SW Update TR069 &FOTA&Local Update
WIFI Mode  AP+STA
WIFI Security OPEN & WPA-PSK& WPA2-PSK & WPA-PSK/WPA2-PSK;
SMS & Phone Book Not Support by default, can be customized
USB Function Support
Voice VoLTE & CS Domain voice & VOIP

· It must support the Telephony service with VoIP technology
  CS over UMTS / GSM networks (optional)
  One RJ11 port for telephone
  -You must have pre-configured the proxy server address, proxy port, Registry server address, Registry server port, Domain name of the SIP server.
-SIP voice services
•          G.711a/G.711u/G.729
•          CS voice services sobre UMTS/GSM networks (opcional)
•          CSFB (opcional)
IPv4 Support IPv4
IPv6 Support IPv6
Protocol Operation:
• -TCP, UDP, ICMP
• - DHCP Client / Server
• - DNS Proxy,-not support Dynamic DNS
• - DNS Relay or DNS Proxy
• - UPnP, IPv6 / IPv4 dual stack
• - VPN Passthrough
Firewall • Firewall Switch, Mac Filtering, LAN IP Filter, Special Applications, Settings, Port forwarding, DMZ, SIP ALG settings, UPnP settings, NAT settings, Domain name filtering, DDNS, triggering. PIN code management.
  --not support Special Applications, DDNS, triggering. Support SIP ALG and UPnP
Administration and Configuration • With configuration software and interfaces through the computer.
• Friendly Web Browser. Monitoring system.
• Diagnosis, Configuration and visualization via web browser.
Supported Operating Systems: Windows XP, Windows Vista, Windows 7, Win 8, Win 10, Linux, Mac OS and later.
Setup menu English
TR069 Support
Application for administration from a cell phone View signal strength and status. See the data traffic used and the SMS sent. Manage connected devices.
Change SSID and password.
--not support management APP for cell phone, only support web GUI.
Certification Depends on customization, cost related
Work Environment (minimum ranges) Operating Temperature Normal: 0 ° to 40 °
Storage Temperature -20 ° to + 55 °
Humidity 5% to 95%
Training • It should include: configuration, programming, testing, firmware upload and equipment operation.
Warranty • 365 days

Related Products

MaxComm 4G LTE Router & WLAN WR-106

MaxComm 4G LTE Router & WLAN WR-106

MaxComm 4G LTE Cat.6 CPE Router WR-123

MaxComm 4G LTE Cat.6 CPE Router WR-123

MaxComm 4G LTE Indoor CPE WR-135

MaxComm 4G LTE Indoor CPE WR-135

MaxComm 4G LTE Indoor CPE Router

MaxComm 4G LTE Indoor CPE Router

MaxComm 4G CAT4 150M 4G Router_WR-137

MaxComm 4G CAT4 150M 4G Router_WR-137