• MaxComm 4G CAT6 VoLTE VOIP WIFI CPE ROUTER  OWR-104 LTE ODU + WR-125 IDU Solution
  • MaxComm 4G CAT6 VoLTE VOIP WIFI CPE ROUTER  OWR-104 LTE ODU + WR-125 IDU Solution
  • MaxComm 4G CAT6 VoLTE VOIP WIFI CPE ROUTER  OWR-104 LTE ODU + WR-125 IDU Solution

MaxComm 4G CAT6 VoLTE VOIP WIFI CPE ROUTER OWR-104 LTE ODU + WR-125 IDU Solution

Model : OWR-104 + WR-125

OWR-104 + WR-125 are a high-performance LTE ODU device, which can provide strong accessibility to the LTE network, and has been designed to meet industrial-grade IP65 dust-proof and water-proof standard. WR-125 are a wireless router supporting the VoIP function, which can provide OWR-104 power supply. OWR-104 + WR-125 in combination is the ideal solution for residential LTE network.


Hardware Specifications

Spec

Description

LTE Chipset

GCT GDM7243QT

LTE standard

3GPP Release 10/11 CAT 6(1)

Host Chipset

MT7621A

Flash

7243QT    - 2Gb;

MT7621A – 1Gb

RAM

7243QT     - 1Gb;

MT7621A – 1Gb;

Power Supply

Gigabit PoE, (2)

Typical value 24V 1A

Maximum Power

Consumption

<14W

IP rating

IP65 (ODU)

LED

ODU

Power/WAN/LAN/SIM/

Signal Strength (3)

IDU

Power/Internet/WiFi 2.4G/ WiFi 5G/USIM/TEL/

Signal Strength(4)

USIM

Support 1.8V/3.0V 2FF USIM

Antenna

4 directional antennas

(1)      Can Support Cat5, Ca6

(2)      WR-125 has 2 LAN ports & 1 WAN/POE port, supply +12V DC to CW7100B

(3)      4 Bars

(4)      4 Bars

Environment Specifications

Feature

Capability

Temperature

Operating

-30~ 55

Storge

-40~ 85

Humidity

Operating

10 ~ 90%

Storge

5 ~ 95%


RF Specifications

Feature

Capability

Support Bands

FDD

1/2/3/4/5/7/8/20/28

TDD 38/40/41/42/43/48

CA

Inter/Intra 2CA

MIMO

DL 2*2DL 4*4

Tx

1 Tx

Output Power@25

23±2 dBm

LTE Antenna

4 directional

antennas

LTE

Antenna Gain(1)

700M~1G

5dBi

1.7G~2.7G

8dBi

3.4G~3.8G

11 dBi

Wi-Fi Frequency

2.4GHz/5GHz

Wi-Fi Antenna

Build-in high gain Wi-Fi antenna, 2.4GHz, 5GHz

separate

Output Power

18dBm/2.4G;

20dBm/5GHz;

Wi-Fi Channel BW

20 MHz & 40 MHz

Wi-Fi Antenna Gain

3dBi

(1)      If the antenna supports all frequency, the antenna gain will be lower than the value in table


Dimensions



Software Specifications

Language Settings: Simple Chinese, English(1)

Support NAT/Bridge/Router mode

Support the http or https web server

Support two users (admin user and normal user)

and different access level and display

Throughput

TDD DL 260Mbps UL30Mbps

FDD DL 300Mbps UL50Mbps

LAN

1000Mbit/s

MDI/MDIX auto-sensing

IEEE802.3/802.3u is compatible

PIN Management, SIM card Authentication

Encryption backup current settings and restore

the backup settings

Export current diagnosis results and operation

logs

Statistics

Link Status (LAN)

Transmit / receive traffic in

packets

Up Time

Support multi-APN

VPN

L2TP V2/V3

PPTP

GRE L2/L3

GRE over IPSec

L2TP over IPSec

IPSec

ipv6/ipv4 dual stack

Status(2)

Signal strength

Network type

Network connection status

SIM card status

Operator name, system mode

Support full band or preferred band and

frequency

Support PCI lock (Cell lock)

Only carrier SIM shall work in the CPE

Support BIP

(1)      Multiple languages can be customized

(2)      Can be customized


Device Management

Integrity Check

Image One Version

Image One Checksum

Image Two Version

Image Two Checksum

Version

Rollback

Auto Rollback to previous version

when upgrade fail

Software Upgrade HTTP/FTP

Auto Upgrade

Full image upgrade

Firmware upgrade manually

Enable / Disable Upgrade

Firmware

Upgrade URL

Version file

Check new firmware every (hr.:

1~744)

Start Time

Random Time

TR069

Supports upload / download the

ACS specified file

Support download CPE

configuration file

Support configure &queries

parameters(1)

Support remote upgrade

Support CPE version update

Supports debugging operations

Support periodic monitor

Port mirror

Can enable or disable the port

mirror function

syslog

Support the syslog function can send the log to the PC via LAN.

Diagnostics

Support the Ping and trace route

(1)     Can be customized


Bridge Mode

Data traffic

forward

Forward the data traffic between the LTE network and PCs.

Maximum 4 PCs

support

Each PC connect to the LTE public network via one APN

Module can be managed

One APN can be allocation for the module and the module can be managed via TR069 such remote

update version

Public IP allocation

PC get the public IP dynamic from the DHCP server in the CPE. The IP is public CPE get from LTE

network.

Multiple

APN

Up to 4 APNs support, and can set

the static router for each APN

Router Mode

LAN

Can be set 2 IP addresses on the

LAN and for 2 different Network.

WAN

Can be set dynamic or static.

Router

protocol

Not support current

DNS

Can be set

Multiple

APN

Up to 4 APNs support, and can set

the static router for each APN

NAT

Support NAT function

Firewall

Can enable or disable the firewall

Multiple

APN

Up to 4 APNs support, and can set

the static router for each APN

DMZ

The DMZ can be set.

DHCP

server

Support the DHCP server

DNS

Support the auto DNS or manual

DNS configuration

 
NAT Mode


WIFI Features

Users can turn on/off WLAN function through two ways, one is touch the WLAN button, the

second is Web UI.

Support configuration WLAN functions through Web UI, include: SSID, SSID broadcasting turn on/off, AP Isolate function, Channel, rate and

mode

Support encryption: Un-encrypted, WEP-OPEN, WEP-SHARED, WPA-PSK (TKIP), WPA-PSK

(AES), WPA2-PSK (TKIP), WPA2-PSK (AES)

Support WPS: Support PBC mode

WiFi protocol support: IEEE 802.11b/g/n/ac

2.4GHz 5GHz

WiFi support max. users: 32

Support SSID broadcasting

Support multi SSID

Support WiFi channel self-adapt and select

Support WDS

Firewall Features

Firewall Configuration

Allow Ping from WAN

Allow HTTPs login from WAN

HTTPs Login Port from WAN

DMZ IP Address

Redirect ICMP to the Host

Support the IP filter

Support the MAC Filter

Support the URL Filter

Support UPnP

Support the Port forwarding

VoIP

(Note: VoIP or VoLTE but can’t support at the same time.)


Call Features

Call Waiting

Call Hold /Resume Call Forward

On busy


Out-of-band DTMF Relay (RFC2833)

In-band DTMF relay

Detection

CPT

Generation

Detection

FAX/Modem

G3/SG3 Fax pass-through

T.38 fax relay

V.22/V.32 modem pass-through

No condition No answer Call Transfer Blind transfer

Attended transfer Early attended transfer 3-Way conferencing Digit Map / Dial plan

Caller ID display/blocking RTP monitor

RTP Redundancy

SBC (session border control) Redundancy

Session Timer

(INVITE/UPDATE)

Codec

G.711 A/Mu Law Appendix I Appendix II

G.726(16,24,32,40 Kbps) G.729AB

G.723.1(6.3Kbps / 5.3Kbps) AMR-NB

AMR-WB

G.722

Echo Canceller

G.167  AEC (Acoustic Echo Cancellation)

G.168  Line Echo Canceller

Voice Enhancement

Adaptive Jitter Buffer/Fixed Jitter Buffer VAD/CNG/SID

PLC (Packet Lost Concealment) LGC (Linear Gain Control) Gain calibration

Mixer

Caller ID

DTMF CID Generation Bellcore CID Type I/II Generation/Detection ETSI CID Type I/II

Generation/Detection

CID CAS/DTAS/SAS Tones generation

DTMF

Generation

 

VoLTE

(Note: VoIP or VoLTE but can’t support at the same time.)

Registration

Registration event package

Network-initiated de-registration

IMS       Communication       Service

Identifier (ICSI)

Public user identity in the first (or

only) record in the Elementary File in the ISIM

Temporary public user identity

derived from the IMSI

Authentication

IMS     Authentication     and      Key

Agreement (IMS-AKA), Sec-Agree and IPSec

ISIM based authentication

USIM based authentication

Authentication at the Ut reference

point

Address

SIP     URIs     (alphanumeric)     and Mobile Subscriber ISDN Number

(MSISDN) based IMPU.

“Phone-context” parameter

P-Called-Party-ID header field

Basic Call

AMR-NB

AMR-WB

Caller ID Name and Number

displayed

Supplementary Call Features

Originating/ Terminating

Identification Presentation

Originating/ Terminating


Dual-mode Dynamic Adaptive/

Fixed Jitter Buffer

Ad-Hoc 3-Party Conference(server

mode)

G.711-AlawVoice Compression

G.711-MuLaw Voice Compression

Silence Compression

G.168 16ms tail Line Echo

Cancellation

Packet Loss Compensation and

Voice Activity Detection

Caller ID Generation (FXS)

10ms, 20ms, 30ms, and 40ms

packet size supports

FAX Modem Tone Detection

FAX Pass-Through over G.711

Identification Restriction

Communication Forwarding unconditional/ on not Logged/ on Busy/ on not Reachable/ on No

Reply

Barring of All Incoming/Outgoing

Calls

Barring of Outgoing International

Calls – ex Home Country

Barring of Incoming Calls - When

Roaming

Communication Hold

Message Waiting Indication

Communication Waiting

Ad-Hoc 3-Party Conference

Three Way Session creation

Communication

Diversion/Forward (CDIV)

IMS-SIP

Session Initiated Protocol (SIP)

registration procedures

SIP preconditions framework

Session Description Protocol (SDP)

offer/answer for voice media

Real Time Protocol (RTP) profile

RTP over UDP

RTP Control Protocol (RTCP)

DTMF

Guaranteed Bit Rate (GBR) bearer

IETF RFC 4575

PDN type: IPv4v6

P-CSCF

Discovery

3GPP TS 24.229

3GPP TS 31.103

DSP Processing

3GPP TS 26.114

Adaptive Multi-Rate speech codec

(AMR)

AMR wideband codec

Narrowband 8KHz and Wideband

16KHz Frameworks

DTMF Tone Generation and

Detection

Call Progress Tone Generation

 


Application Diagram

Appendix-Delivers

OWR-104 Outdoor CPE

1 PCS

WR-125 Indoor CPE

1 PCS

Gigabit POE,

Typical value 24V 1.0A

1 PCS

Accessories for pole mounting

1 PCS

Quick Start Manual

1 PCS

(1)      Detail Delivers need to be defined by customer agreement