- Home
- Products
- 4G LTE Industry Outdoor /Indoor Modem Router
MaxComm 4G LTE Industrial DTU Router M-150
This document describes the electrical characteristics, RF performance, size and application environment of M-150. Under the introduction of this document, end users or developers can quickly understand the hardware functions of M-150.
M-150 is an industrial DTU with 4G function, used for data transmission services of industry users, supports transparent data transmission, access to the Internet through 4G mobile communication dial-up or 100Mbps WAN port dial-up, and then share the Internet network through wireless WiFi 4 and 100Mbps wired LAN .
Relevant standard specifications: USB2.0 bus standard
Standard SIM/USIM interface standard IEEE802.11n/g/b
IEEE802.3/802.3u
Mini PCI Express Card Electro mechanical Specification Revision 1.0-2003 4G mobile communication standard, which is determined by the selected 4G
mobile communication module
|
Power LED |
always on when the power is turned on, and it is not on when the power fails or is not connected to the power supply. The left LED lights in the bottom row |
|
2.4G WIFI LED |
always on when the 2.4G WIFI function is turned on, flashes when there is data communication, and it is not on when the 2.4G WIFI is not turned on or when the 2.4G WIFI function is faulty, the right LED lights in the lower row |
|
Mobile 4G LED |
This LED light is controlled by the routing system, it is recognized that the 4G module is always on, the 4G module is faulty or there is no 4G module, the LED light does not light up, the left LED light in the upper row |
|
External network LED light |
The device dials successfully through the 4G mobile communication module or the WAN port. It is always on when it |
SHAPE \* MERGEFORMAT
|
communicates with the Internet normally, and it does not turn on when the device cannot access the Internet. The upper row of left LED lights |
Hardware
platform introduction
|
Processor |
MT7628DA MIPS24KEc architecture CPU, the main frequency is up to 580MHZ |
|
2.4G WIFI Chip |
MT7628DA integrates 2.4G WIFI function IEEE 802.11n/g/b, maximum rate 300Mbps |
|
RAM |
DDR2 64MB, Does not support custom memory size |
|
Flash |
Nor Flash 16MB |
|
Not support NAND Flash |
This hardware product is designed with a hardware watchdog function. After the hardware watchdog is powered on, it will automatically turn on and detect the heartbeat level output by the routing system that jumps once per second. If the routing system itself fails (such as a crash), it will also Naturally, the heartbeat level can no longer be output. At this time, if the hardware watchdog does not detect the heartbeat level within 120 seconds, it will shut down itself for 15 seconds and then restart the entire system.
|
|||||||
Compatible with IEEE 802.11 b/g/n, support IEEE 802.11 d/h/k; support 20MHz, 40MHz, use 2T2R MIMO antenna technology, the highest connection rate is up to 300Mbps. The following is an explanation of 2.4G WIFI's power frequency, receiving sensitivity, and transmitting power.
|
|
Items |
Max. |
Rated value |
Mim. |
Unit |
|
Work frequency |
|
2484 |
|
2412 |
MHz |
|
Receiving sensitivity |
11 Mbps CCK |
-86 |
-87.5 |
-89 |
dBm |
|
54 Mbps OFDM |
-72 |
-74 |
-76 |
dBm |
|
|
BW=20MHz MCS 7 |
-70 |
-72 |
-74 |
dBm |
|
|
BW=40MHz MCS 7 |
-68 |
-70 |
-71 |
dBm |
|
|
Transmit power |
11 Mbps CCK |
19 |
18 |
17 |
dBm |
|
54 Mbps OFDM |
17 |
16 |
15 |
dBm |
|
|
BW=20MHz MCS 7 |
17 |
16 |
15 |
dBm |
|
|
BW=40MHz MCS 7 |
16 |
15 |
14 |
dBm |
3 Power supply and power consumption description
|
|
Test Condition |
Min. |
Rated value |
Max. |
Unit |
|
Work voltage |
T A = 25°C |
6 |
12 |
32 |
V |
|
Absolute working voltage |
T A = 25°C |
5 |
|
36 |
V |
|
Work current |
VIN=12V，T A = 25°C |
0.3 |
0.5 |
0.8 |
A |
Please use the MaxComm standard power adapter to supply power to this product. If the MaxComm standard power supply is not used, please supply power to this product in strict accordance with the above power specifications, otherwise the product will be damaged. If you use a battery or vehicle power supply to supply
power, you must take anti-static and anti-surge countermeasures.
4 4G mobile communication function
This product has a built-in mini-PCIE interface, which can be used to expand 4G mobile communication functions, and the built-in mini-PCIE interface supports USB2.0 bus. The specific frequency band supported by 4G mobile communication is determined by the selected 4G module.
5 Introduction to structural parameters and accessories
|
Weight （KG) |
TBD |
|
|
Shell size |
TBD |
|
|
Color |
TBD |
|
|
Accessories |
Manual |
1PCS |
|
Certificate of conformity |
1PCS |
|
|
Power adapter |
12V1A 1PCS |
|
|
Network cable |
8P8C 1PCS |
|
|
SIM card adapter |
1PCS |
|
6 Software configuration information
|
Default IP |
192.168.1.1 |
|
User name Password |
root/admin |
|
2.4G SSID |
WIFI-XXXXXX (X is the last 6 digits of MAC address), no password by default |
|
5.8G SSID |
NA |
The above is the general default configuration information of the product. The WIFI SSID may be different when using our OS firmware or OPENWRT firmware, but the default IP and WEB login name and password of this product remain unchanged. For other detailed software functions, please refer to the product description.
|
Work temperature |
0℃ to 40℃ |
|
Storage temperature |
-40℃ to 70℃ |
|
Working humidity |
10% to 90%RH Non-condensing |
|
Storage humidity |
5% to 90%RH Non-condensing |
