- Home
- Products
- 4G LTE CPE Router
MaxComm 4G CAT4 150M 4G Router_WR-137
WR-137 is a high-performance wireless communication
product developed by MaxComm Co., Ltd based on 4G network requirements. It is
mainly used for data transmission services, equipment monitoring, wireless
routing and other functions. WR-137 adopts high-performance processor, which
can process protocol and large amount of data at high speed. It can be used
with a variety of 4G CAT4 module, providing 802.11b/g/n Wi-Fi access.
|
Spec |
Description |
|
Chipset |
ZX297520V3E/ ZTE |
|
LTE Standard |
LTE CAT4 150 Mbps(DL)/50 Mbps(UL) |
|
Memory |
ROM: 128MB NAND Flash |
|
RAM: 64MB DDR |
|
|
Interfaces |
LAN RJ45 Port (FE) * 1; RJ11 Port * 1 (Optional); DC Socket; Battery Socket (Optional); SMA Interface * 2; SIM Slot * 1; USB Socket (For Manufacture); |
|
Buttons |
POWER On/Off Button WPS Button Wi-Fi Button RESET Button |
|
Indictors |
Power/Battery Wi-Fi Switch 4G/3G/2G Internet Signal Strength (5 bars) |
|
SIM |
Micro SIM(3FF) Support 1.8V & 3.3V |
|
Power Adaptor |
AC100V~240V,50Hz~60Hz DC 12V 1A, DC 12V 0.5A(If no need battery and voice) |
|
Battery |
Rechargeable lithium battery |
|
Capacity: 7.4V/2000mAh |
|
|
Maximum working hours: 2 (depending on the network) |
|
|
Maximum standby hours: 8 (depending on the network) |
|
|
Dimensions |
130*100*46mm |
|
Weight |
Approximately 155g |
RF Specifications
|
Feature |
Capability |
|
Supported Bands (Band will be customized as per requirement) |
LTE TDD: B38/39/40/41 LTE FDD: B1/2/3/4/5/7/8/20(28) |
|
HSPA+/HSPA/UMTS: B1/B2/B4/B5/B8 |
|
|
GSM: 850MHz/900MHz/1800MHz/ 1900MHz |
|
|
LTE MIMO |
MIMO 2*2(1TX 2RX) |
|
LTE Tx |
1 Tx |
|
LTE Output Power@25℃ |
23±2 dBm |
|
LTE Antenna |
2 Built-in 2 External |
|
LTE Antenna Gain |
Built-in Antennas: 3 dBi; External Antennas: 5 dBi; |
|
LTE Peak Throughput |
DL 150 Mbps, UL 50 Mbps |
|
Wi-Fi Frequency |
2.4 GHz |
|
Wi-Fi Output Power |
15 dBm/2.4G |
|
Wi-Fi Antenna |
2 Build-in Antennas |
|
Wi-Fi Antenna Gain |
3 dBi |
|
Wi-Fi Channel BW |
20MHz, 40MHz |
|
Wi-Fi MIMO |
MIMO 2*2 (2T2R) |
|
Wi-Fi Protocol |
802.11 b/g/n |
|
Wi-Fi Concurrent Users |
32 |
If the LTE antenna supports all frequency, the antenna gain will be lower than the value in table.
|
|
Feature |
Capability |
|
Operating Temperature |
0°C~40°C |
|
Storage Temperature |
-20°C~70°C |
|
Operating humidity |
95% Maxton-condensing |
|
Storage humidity |
95% Maxton-condensing |
Topology
Topology based on LTE WAN network
|
Spec |
Description |
|
Language |
English |
|
Chinese |
|
|
Could be customized |
|
|
Https/http |
Both |
|
User login |
Support two users (user and admin) with different limitation and display |
|
SMS |
Write/send/receive short messages Send/receive extra-long messages |
|
LTE Network Setup |
Create/delete/edit APN |
|
IPv4v6 dual stack |
Support IPV4, IPV6, IPV4V6 |
|
|
|
NAT Mode
|
Spec |
Description |
|
NAT |
Support NAT by default |
|
Firewall |
Can enable or disable the firewall |
|
Router protocol |
Static Route |
|
ALG |
Support |
Wi-Fi Features
|
Functions |
|
Users can turn on/off WLAN function through Web UI. |
|
Support configuration WLAN functions through Web UI, include: SSID, SSID broadcasting turn on/off, Channel, rate and mode |
